| PART NAME |
YEAR |
ENGINE |
MANUFACTURER |
PART # |
NOTES |
| Alternator belt |
at least 76 |
any AMC V8 |
Napa |
25-10803/7425 Premium XL |
|
| Lower radiator hose |
at least 76-78 |
any AMC V8 |
Gates |
20759 |
|
| Upper radiator hose |
at least 76-78 |
any AMC V8 |
Gates |
20914 |
|
| Bypass hose |
at least 76-78 |
any AMC V8 |
Gates |
20625 |
|
| Intake manifold gasket - stock style |
1970 - up |
any AMC V8 |
Fel-Pro |
MS 96011 |
metal valley pan style |
| Intake manifold gasket - composition |
1970 - up |
any AMC V8 |
Mr. Gasket |
#800 (standard), #5844 (Ultraseal) |
These are the fiber, non-metallic type intake gaskets |
| Header gasket |
1970 - up |
any AMC V8 |
Mr. Gasket |
#851 |
I have had excellent luck with these |
| Transmission mount |
1975-1978, 1974? |
360 or 401 |
NAPA |
BK 620-1073 |
OEM type replacement, non-stock item, may take a couple of days to order |
| Lower spring saddle spindle bushings |
1970-up AMC, except possibly Pacer and Eagle |
any |
Performance Suspension 3001 N. 35th Ave Phoenix Arizona Phone 602-272-4085 |
ENE2048G (need four) |
Replaces the lower spring seat spindle bushings, eliminating the need for an expensive replacement assembly. Thanks to John Elle for this tip! |
| Front wheel bearings grease seal |
at least for 1976-78 |
any |
National/Federal-Mogul |
5121 |
These are the grease seals on the back side of the front rotor hub |
| Front wheel bearings |
at least for 1976-78 |
any |
National/Federal-Mogul |
A-17 (inner), A-16 (outer) |
One of each for each wheel. |
| Ball joints |
at least for 1976-78 |
any |
Moog |
K3082 (upper), K3083 (lower) |
|
| Lower control arm bushing |
at least for 1976-78 |
any |
Moog |
K3059 |
|
| Strut rod bushing kit |
at least for 1976-78 |
any |
Moog |
K3090 |
parts for both sides |
| Front sway bar bushing |
at least for 1976-78 |
any |
Moog |
K3110 |
covers both sides |
| Front sway bar end link kit |
at least for 1976-78 |
any |
Moog |
K3093 |
covers both sides |
| Voltage regulator |
at least for 1976-78 |
any |
Borg-Warner |
R295 |
|
| Voltage regulator |
at least for 1976-78 |
any |
NAPA |
VR 428SB |
|
| Engine block heater |
1970-up |
any AMC V8 |
Big A |
880-1223 |
replaces one freeze plug |
| Fuel pump gasket |
1970-78 |
any V8 |
Fel-Pro |
6579 |
same as Chevy big-block |
| Water neck gasket |
1974-78 |
any V8 |
Fel-Pro |
70978 |
|
| Distributor cap |
at least for 1976-78 |
304, 360 |
NAPA |
RR 165 |
|
| Distributor cap |
at least for 1976-78 |
304, 360 |
Borg-Warner |
C158 |
|
| Tie rod end |
at least for 1976-78 |
360 |
Moog |
ES368RL |
|
| Clamp on breather - hooded |
1970-up |
any AMC V8 |
Mr. Gasket |
2044 |
Can be placed on the oil fill tube in place of the stock cap |
| Header studs |
1970-up |
any AMC V8 |
ARP |
100-1412 |
3/8 header studs |
| Shocks |
at least for 1976-78 |
304, 360 |
Monroe SensaTrac |
5803 ST (rear), 5809 ST (front) |
|
| Mini starter |
1970-78 |
any AMC V8 |
IMI |
913N |
mini high torque starter |
| Hi flow water pump |
1970-78 |
anyAMC V8 |
Flow Kooler |
1781 |
|
| Full manual reverse pattern valve body |
1970-78 |
AMC V8 cars |
Turbo Action |
17802 ST |
Full manual, PRN123 shift pattern |